*The practical spreading rate of the product depends on the surface, ambient temperature, application method, actual thickness of the dry coat of the product and the wasted amount.

 (to avoid waste, be sure to buy the right amount of the paint for the surface area required)

Surface processing:

• All new surfaces shall be cured at least 28 days prior to application of the primer.

• Remove old paints completely from previously painted surfaces.

• The substrate should have sufficient strength and free from unsounded areas, pug holes, protrusions and pops.

• Make sure that the surface is clean, dry, free from dust, oil, grease, salt and mold .

• Fill the holes and cracks with suitable fillers such (AL-Shabah Oil Ready Paste & AL-Shabah Cracks Paste & Fitnett Al Shabeh).

• If there are large meanders in the surface, they should be leveled by using “AL-Shabah Fitnett”.

Storage and shelf life:

1. The required temperature during application must not be less than 5°C; the surface moisture should not exceed 8% and the relative humidity at work place should not exceed 70%.

2. pH of surface should not exceed 9.

3. Paint should be stirred carefully before use.

4. Wash the road surface with a cleaning solution and rub with a rough upright broom To remove any mud or oil buildup.

5.Do not apply on wet and moistened surfaces until completely dry.

6.Do not apply the next coat unless the previous one is fully dry. Minimum recoating interval time should be followed. 7. Adequate ventilation should be provided during application.

Drying Time:

 • Surface dry:   20 minutes.

 • Hard dry:  1 hours.

 • Full cure:   1 days .

Single layer thickness:

- Dry layer thickness: 40-60

-Wet layer thickness: 140-215

Cleaning Tools:

 • Once the application is done clean tools immediately by water .

Shelf Life And Storage:

At 25°C. Validity period: 3 years .

warehousing:

 Within a sealed container and in a dry, moderate and well-ventilated place in accordance with local regulations.

Safety Precautions:

• The product should be treated with caution before and during the application.

• Avoid contact with the eye and skin or inhale its spray and fumes during application.

• It is recommended to use the product in well-ventilated places.

• The product must be kept out of the reach of children.

​

For the safety of the environment:

Please deliver excess paint residues and packaging to the nearest certified AL-Shabah paint branches for environmental safety or recycling purposes.

Note: Waste and empty bottles are disposed of in accordance with local regulations specified in the pollution control and environmental protection laws.