Product name: Roof Insulatore AL-Shabah

Package: 20 kg barrel, 3.75 liter gallon

Description :

is a water base elastomeric roofs coating specially designed for heat insulation by solar reflection technology, which decreases interior temperature and energy consumption with extreme waterproofing properties.

Features :

- Exceptional sun rays reflection which reduces indoor temperatures and electricity consumption.

- Excellent waterproofing ability.

- Excellent resistance to dirts keeping coating clean with a high degree of solar reflectivity.

- Excellent resistance to mildew growth.

- Excellent resistance to harsh Middle East weather conditions.

- Excellent resistance to UV.

- Excellent flexibility and crack bridging.

- Excellent adhesion to variety of construction surfaces.

- Very low VOC.

Recommended to Use :

Recommended to use where solar reflectivity properties and exceptional waterproofing are required on horizontal and slope variety surfaces of steel, galvanised steel, concrete, cement tiles, polyurethane foam and butiminum surfaces, for roof of steel structures, warehouses, commercial buildings, residential buildings and service facilities.

Surface Type :

horizontal and slope variety surfaces of steel, galvanised steel, concrete, cement tiles, polyurethane foam and butiminum surfaces,

Application Tools :

Airless spray: Roller : Brush:

dilution:

 'Tap Water .

​

*The practical spreading rate of the product depends on the surface, ambient temperature, application method, actual thickness of the dry coat of the product and the wasted amount.

 (to avoid waste, be sure to buy the right amount of the paint for the surface area required)

Surface processing:

• All new surfaces shall be cured at least 28 days prior to application of the primer.

• Remove old paints completely from previously painted surfaces.

• The substrate should have sufficient strength and free from unsounded areas, pug holes, protrusions and pops.

• Make sure that the surface is clean, dry, free from dust, oil, grease, salt and mold .

• Fill the holes and cracks with suitable fillers such (AL-Shabah Oil Ready Paste & AL-Shabah Cracks Paste & Fitnett Al Shabeh).

• If there are large meanders in the surface, they should be leveled by using “AL-Shabah Fitnett”.

Storage and shelf life:

1. The required temperature during application must not be less than 5°C; the surface moisture should not exceed 8% and the relative humidity at work place should not exceed 70%.

2. pH of surface should not exceed 9.

3. Paint should be stirred carefully before use.

4. A suitable quantity of "Tap water" can be added to get reasonable viscosity for application.

5.Do not apply on wet and moistened surfaces until completely dry.

6.Do not apply the next coat unless the previous one is fully dry. Minimum recoating interval time should be followed. 7. Adequate ventilation should be provided during application.

Application Tools: Airless spray :

 Nozzle Orifice : 0.017-0.021" Nozzle Pressure : 15 MPa (150 Bar) Spray Angle : 40-60°

  Roller : Recommended Type Normal type

 Brush : General / Normal type.

Drying Time:

 Surface Dry :  2 hours

  Full cure : 7 days.

Shelf Life And Storage:

At 25°C. Validity period: 3 years

warehousing:

 Within a sealed container and in a dry, moderate and well-ventilated place in accordance with local regulations.

Safety Precautions:

• The product should be treated with caution before and during the application.

• Avoid contact with the eye and skin or inhale its spray and fumes during application.

• It is recommended to use the product in well-ventilated places.

• The product must be kept out of the reach of children.

For the safety of the environment:

Please deliver excess paint residues and packaging to the nearest certified AL-Shabah paint branches for environmental safety or recycling purposes.

Note: Waste and empty bottles are disposed of in accordance with local regulations specified in the pollution control and environmental protection laws.